Installation guide

Configuration Scenarios
104 Runco WindowWall Installation Guide
Wall Settings
Big Picture is not used in this scenario, so WALL MODE should be set to off on the BIG
PICTURE SETUP menu for all displays. The Quick Configure setting takes care of this for
you.
Scenario 2: Runco Big Picture
When in Runco Big Picture, one source is spread over the entire wall. In the Runco
WindowWall product, any input can easily be used as the source for big picture.
Note: 3 x 3 wall using Runco Big Picture. Any input can be spread over the whole wall.
A1
Quick Configure Big Picture B3
A2
B1 B2
A3
B3
C1 C2 C3
A
Loop Out
Dual Link In
Loop Out
Dual Link In
Loop Out
Dual Link In
Digital 1 Digital 2 Digital 3 Digital 4
B
Digital 1 Digital 2 Digital 3 Digital 4
Digital 1 Digital 2 Digital 3 Digital 4
C
Source 1 Source 2 Source 3
Source 9
Source 4 Source 5 Source 6
Source 7 Source 8