Installation guide

Saving and Recalling Configurations
Runco WindowWall Installation Guide 97
Changing the Name of the Memory Slot
The default name is an abbreviation of the source connector, resolution, and if Wall
Mode is on, wall settings. In the following example, the name tells you that the
source is connected to Digital, which displays 1366 x 768, is part of a 2 x 2 array, and
is the display in the upper left corner (column 1, row 1).
1 If you want a more descriptive name, select NAME and press ENTER.
A little bar appears beneath the NAME line.
a Use the + or - keys to move the yellow selector under the character you want
to change.
b Use the up/down arrows to change the character.
2 When you are finished, press PREV.
3 Select SAVE NOW and press ENTER.
Note: If you use RS232 controls, you can also use commands to send a string name to a
memory slot, saving time.
Save
Slot Number 1
Save Now
Name DI 1366x768 2x2 1:1
Source Digital
Colorspace RGB
Resolution 1366 x 768
Wall 2 x 2 1:1
Scale/Justify One to One / Center
Postion/Overscan 168,19 / 0%
Zoom UL/ LR +0,+0 / +0,+0
Viewport UL/LR +0,+0/ +0,+0
Frequency/Phase 1602 / 22.5°
Sharpness Normal
Black Level 63 55 57
White Level 166 170 169