Installation guide

Saving and Recalling Configurations
94 Runco WindowWall Installation Guide
Memory: What Is Saved? And Where?
In the display, some parameters (values) are associated with the mode. The mode is
primarily the horizontal and vertical resolution and the vertical frequency of the
incoming source picture. It is more than that, but if you think of it this way, you will
be close enough. Some parameters are associated with the input. The parameters
specific to mode and input are saved in memory slots.
Some parameters are global. They are independent of the mode or input, and are not
saved to memory slots, as shown in the table below.
Parameter Saved in Slot Global
ASCII Response Term. x
ASCII Response Type x
Auto Backlight On x
Baud Rate x
Black Level: R, G & B x
Brightness (video) x
Color Balance (all values) x
Contrast (video) x
Hue x
Justify x
Menu Timeout x
Overscan x
Plug and Play (EDID) x
Position, Horizontal x
Position, Vertical x
Saturation x
Sharpness x
Viewport Window Bottom x
Viewport Window Left x
Viewport Window Right x
Viewport Window Top x
Wall Height x
Wall Mode x
Wall Unit Column x
Wall Unit Row x
Wall Width x
White Level: R, G & B x
Zoom Window Bottom x
Zoom Window Left x
Zoom Window Right x
Zoom Window Top x
Parameter Saved in Slot Global