Specifications

35
If a slidebar, menu or message is displayed you have limited time in which to make a
keypad entry before the projector returns to presentation level and the graphic disappears.
These time-outs may vary depending on what is displayed.
Menu options that include this icon apply universally to any incoming signal.
Most of the function menus allow you to change settings by using slidebars, checkboxes,
and pull-down lists. To select a slidebar, toggle a checkbox status or view a pull-down
list, do one of the following within the function menu:
• Enter the menu option number corresponding to the setting you wish to change (for
example, press 1 3 to select Vertical Stretch in the
Size & Position menu).
• Or move the highlight to the option desired and press (Enter).
• Or move the highlight to the option desired and press to adjust immediately.
• Or bypass the menus entirely and use a single key to immediately access an adjustment
during your presentation (NOTE: applies only to options having their own key, such as
Focus, Zoom, etc.).
• For “blind” access, hide the entire menu system (see OSD key, above) and/or direct
slidebars activated by their own key (such as Contrast, Brightness, etc.). Control by
using the proper keypress or numerical sequence of key presses.
Once selected, change the setting as desired (see below) and press to save and return
to the current function menu.
From presentation level, press Help to access general Help Topics. Scroll as necessary
within a topic. Press Help or Exit to return to your presentation.
Figure 3.5 Context-sensitive Help
Figure 3.6 Accessing General Help Topics
➤
Time-outs
➤
The Global Icon
➤
Using Slidebars and Other
Controls
Section 3: Operation Section 3: Operation