- Runco's Digital Light Processing Projector and DHD Controller Owner's Manual VX-2c

26
MENU DESCRIPTION AND NAVIGATION
Tests
Test Black
Test White
Test Green
Test Red
Test Blue
Check Board
Alignment
H Ramp
V Ramp
Tests
Indicates you are In the Internal DLP Test mode
Test Black Press ENTER to display a full Black screen
Test White Press ENTER to display a full White screen
Test Green Press ENTER to display a full Green screen
Test Red Press ENTER to display a full Red screen
Test Blue Press ENTER to display a full Blue screen
Check Board Press ENTER to display a Checker Board pattern
Alignment Press ENTER to display an Alignment crosshatch pattern
H ramp Press ENTER to display a Horizontal Grey Ramp
V ramp Press ENTER to display a Vertical Grey Ramp
Gamut
Manual
Gamut
Indicates you are in the Gamut Settings menu
Manual Puts Gamut setting into Manual mode
From the Diagnose menu use the Up or Down arrow to select “Int Test” and press the Enter button to call up the Service
options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
From the Color menu use the Up or Down arrow to select “Gamut” and press the Enter button to call up the Manual option.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.