- Runco's Digital Light Processing Projector and DHD Controller Owner's Manual VX-2c

MENU DESCRIPTION AND NAVIGATION

Orient

Use Preference window to select projector picture orientation

From the Main menu use the Up or Down arrow to select “Orient” and press the Enter button to call up the Orient

display. The Orient display allows selection of Picture Orientation options.

There are four options:

Floor F.: Floor Front configuration.

Ceiling F.: Ceiling Front configuration

Floor R.: Floor Rear configuration

Ceiling R.: Ceiling Rear configuration

Use the Up or Down button to indication your selection and press the Enter button to make your selection.

Press the Menu button to exit.

Lens Adj.

Shift L/R

Shift U/D

Lens Zoom

Lens Focus

Use the Lens Adj. display to make lens adjustments

From the Main menu use the Up or Down arrow to select “Lens Adj.” and press the Enter button to call up the

Lens Adj. Options.

There are four options:

Shift L/R: Shift the image (mechanically) left or right.

Shift U/D: Shift the image (mechanically) up or down.

Lens Zoom: Decrease or Enlarge the image size (mechanically).

Lens Focus: Adjusting the image focus.

Use the Up or Down button to indication your selection and press the Enter button to make your selection.

Press the Menu button to exit.

Lens Adj.

Indicates you are on the Lens setting menu

Shift L/R Press ENTER to Shift the lens Left and Right by using the

Left and Right arrows

Shift U/D Press ENTER to Shift the lens Up and Down by using the Up

and Down arrows

Lens Zoom Press ENTER to Focus the lens by using the Up and Down

arrows

Lens Focus Press ENTER to Zoom the lens by using the Up and Down

arrows

Preference

Indicates you are on the Preference Settings menu

Orient Press ENTER to select the Orientation setting menu