Specifications

Specifications
Runco RS-440 Installation/Operation Manual 67
PRE
L
IMINAR
Y
7.4
Computer Signal
Compatibility
The RS-440 can display video signals from a variety of computer sources via its DVI-I and
HDMI inputs.
Table 7-2 lists the signal types that are compatible with the RS-440, and indicates which
of those are VESA standards.
Table 7-2. Computer Signal Compatibility Chart
PC/MAC/
WS
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
VESA
Standard
HDMI
Support
PC
VGA
720 x 400 31.5 70 √
640 x 480
31.5 60 √
37.9 72 √ √
37.5 75 √ √
43.3 85 √ √
SVGA 800 x 600
35.1 56 √ √
37.9 60 √ √
48.1 72 √ √
46.9 75 √ √
53.7 85 √ √
XGA 1024 x 768
48.4 60 √ √
56.5 70 √ √
60.0 75 √ √
68.7 85 √ √
WXGA 1280 x 768 47.8 60 √
SXGA 1280 x 1024
64.0 60 √ √
80.0 75 √ √
91.1 85 √ √
WSXGA+ 1680 x 1050 65.2 60 √
UXGA 1680 x 1200 75.0 60 √ √
MAC 13” VGA 640 x 480 34.9 67 √
MAC 16” SVGA 832 x 624 49.6 75 √
MAC 19” XGA 1024 x 768 60.2 75 √
Notes:
1. This projector may not be able to display images from notebook computers in simultaneous
(CRT/LCD) mode. Should this occur, switch the notebook computer to “CRT only” mode. If you
are unsure how to do this, refer to your notebook computer’s user manual.
2. Interlaced video signals received through the DVI-I input may not display correctly. If this occurs,
use the Component, S-video or Composite video input instead.
3. The RS-440 does not support composite sync or sync-on-green RGB signals.