Specifications

Runco RS-440 Installation/Operation Manual 63
PRE
L
IMINAR
Y
7.1
RS-440 Specifications
Table 7-1 lists the RS-440 specifications.
7. Specifications
Table 7-1. RS-440 Specifications
Projector Type: Digital Light Processing (DLP), Single-Chip SuperOnyx DMD
Native Resolution: 1280 x 720 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema
Video Standards: NTSC, PAL, SECAM
Video Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Scan Frequency: Horizontal: 15 - 91 kHz
Vertical: 24 - 85 Hz
Picture Size (16:9 Screen): Recommended Width: 72 in. (1.83 m) to 120 in. (3.05 m)
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal and Vertical
Offset (when projector is
inverted):
Refer to Table 3-4
Lamp: 230 Watts
Estimated Lamp Life: 2000 hours
Video Inputs: (1) Composite
(1) S-Video
(1) RCA Component (YPbPr)
(1) DVI-I
(1) HDMI with HDCP
Control Options: - Discrete IR remote
- Serial commands via RS-232
RS-232 Communication
Parameters:
9600 bps, no parity, 8 data bits, 1 stop bit, no flow control
+12V Output: Max. 0.25 Amps, active when Cinema or Virtual Cinema
Aspect Ratio is selected (RS-440LT/CineWide only) or when
projector is turned on;
Tip = +12V; Sleeve = Ground
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 330 Watts
(1126.3 BTUs/hour)
Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions: RS-440: See Figure 7-1
RS-440LT: See Figure 7-2