Specifications

Installation
Runco RS-440 Installation/Operation Manual 19
PRE
L
IMINAR
Y
Table 3-4 gives the lens shift limits for the RS-440, as percentages and absolute
measurements with a 96 x 54 inch (1.78:1) screen.
Folded OpticsIn rear-screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown in
Figure 3-6. The position of the projector and
mirror must be accurately set. If you are considering this type of installation, contact your
dealer for assistance.
Figure 3-6. Folded Optics
Table 3-4. Vertical and Horizontal Lens Shift Limits
RS-440 RS-440LT
Lens Shift Limits, as Percentages of Screen Height or Width (Notes 1 and 2)
Vertical
(Notes 2 and 3)
Up 50% 50%
Down 55% 75%
Horizontal
(Note 2)
Left 7.5%
Right 7.5%
Lens Shift Limits in Inches, with a 96-by-54 inch (1.78:1) Screen
Vertical
Up 27.00 27.00
Down 29.70 40.50
Horizontal
Left 7.20
Right 7.20
Notes:
1. With no vertical or horizontal lens shift, the lens center and screen center are aligned with each
other.
2. Vertical shift limits are percentages of the screen height. Horizontal shift limits are percentages of
the screen width.
3. Vertical lens shift figures apply to ceiling mount configurations. For floor installations
(where the projector is upright), reverse the up/down vertical offset percentages.
Screen
Mirror