Specifications
Table Of Contents
- TWO YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Projection Lens, Lamp and Cooling
- 3.5 Installing the Optional CineWide Lens Mount
- 3.6 Mounting the SC-1
- 3.7 Connections to the SC-1 and DHD Controller
- Input Panel Access
- Connecting the DHD Controller to the SC-1
- Connecting Source Components to the DHD Controller
- RS-232 Controller Connection
- Connecting 12-volt Trigger Outputs to External Equipment
- Connecting an External IR Receiver to the DHD Controller
- Connecting an External Power Supply/Ballast to the Projection Head
- Connecting to AC Power
- 3.8 Turning on the Power
- 3.9 Maximizing Light Output
- 3.10 Adjusting the Picture Orientation
- 3.11 Primary Lens Adjustments
- 3.12 Installing and Adjusting the CineWide Anamorphic Lens
- 3.13 Calibrating Projector Input 2 (DVI)
- 3.14 Working With the Lamp
- 4. Operation
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications

Runco SC-1 Owner’s Operating Manual 107
PRE
L
IMINAR
Y
7.1
SC-1 Specifications
Table 7-1 lists the SC-1 specifications.
7. Specifications
Table 7-1. SC-1 Specifications
Projector Type: Digital Light Processing (DLP), 3-chip, SuperOnyx DMD
Native Resolution: 2048 x 1080 (1.90 native aspect ratio)
Aspect Ratios: Refer to Table 7-2
Video Standards: Refer to Table 7-2
DTV Compatibility: 480p, 720p, 1080i
Scan Frequency: Horizontal: 15 kHz to 120 kHz
Vertical: 23.97 Hz to 150 Hz
Picture Size (16:9 Screen): Recommended width = 72 to 480 in.
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal and Vertical
Offset:
Horizontal:
• 20% of screen width left or right (1.78:1 screen)
• 17% of screen width left or right (1.90:1 screen)
Vertical:
• 43% of screen height up or down
Lamp Type: 2.0-kW Short-arc Xenon lamp module
Estimated Lamp Life: 1,000 hours
Inputs (from DHD
Controller):
(1) DVI-I with HDCP
(1) RS-232
Other Inputs (currently not
used):
(1) RS-422
(1) Composite Video
(1) Component Video
(1) S-Video
Controls: • Built-in keypad
•IR remote
• Serial commands via RS-232 (from DHD Controller)