Specifications

5) <GSS> (GET STATUS SETUP: Gets menu and installer SETUP data.)
Order Data Size Output Remarks
1 GAMMA 1byte 1: GAMMA 2.0 2: GAMMA 1.8
3: GAMMA 2.2 4: DRE MID
5: DRE HIGH 6: DRE LOW
7: HIGH CNT.
#
2 BRT. ENHANCE 1byte 0:OFF 1: ON #
3 SUB VOLUME 2byte 00 to 20
4 COLOR TEMP. 1byte 1: LOW 2: MID LOW
3: MIDDLE 4: MID HIGH
5: HIGH
#
5 VIDEO NR 1byte 0: OFF 2: LOW
3: MIDDLE 4: HIGH
#
6 MPEG NR 1byte 0: OFF 2: LOW
3: MIDDLE 4: HIGH
#
7 CTI 1byte 0: OFF 1: ON # (color transient improvement)
8 CINEMAMODE 1byte 0: OFF 1: STANDARD
2: ADVANCE
#
9 COLOR DECODING 1byte 1: RGB 1: COMPONENT1
2: COMPONENT2
#
10 COLOR SYSTEM 1byte 1: AUTO 2: NTSC 3: PAL
4: SECAM 5: 4.43NTSC
6: PAL M 7: PAL N
#
11 SIGNAL FORMAT 3byte # See below
12 Dummy data 3byte
13 Input function data (main) 3byte
14 Screen size data 1byte
15 Check sum 2byte
SIGNAL FORMAT S01 .................... VGA or XGA or SXGA or 720-PC
(720-PC can be selected only when a video card is mounted.)
S02 .................... WVGA or WXGA or SXGA+
S03 .................... 535p or 750p (Either one can be selected only when a video
card is mounted.) or PC AUTO
*** .................... Dummy data is output for signals other than those above.
• 13 and 14 output the same contents as GST items 3 and 5.
• Dummy data is output for setting data that cannot be output depending on the type of # signal.
30