Owner`s manual

Serial Communications
VX-3000 Installation/Operation Manual 83
PRE
L
IMINAR
Y
Table 6-2. Serial Commands: Z Command
Code Function
Z001 Lamp hours -- Normal (User OSD)
Z002 Lamp hours -- ECO (User OSD)
Z004 Lamp hours -- Normal (Factory OSD)
Z005 Lamp hours -- ECO (Factory OSD)
Z010 picture mode setting
Z011 User brightness
Z012 User contrast
Z014 User color
Z015 User tint
Z016 User sharpness
Z017 Color temperature
Z034 Burn-In On timer
Z035 Burn-In Off timer
Z038 Burn-In Cycle
Z090 select IRE
Z091 NR_TR
Z092 Detail Enhance
Z093 LTI
Z094 CTI
Z104 Gamma gain -- Red (adjust ColorTemp)
Z105 Gamma gain -- Green(adjust ColorTemp)
Z106 Gamma gain -- Blue(adjust ColorTemp)
Z107 Gamma offset -- Red(adjust ColorTemp)
Z108 Gamma offset -- Green(adjust ColorTemp)
Z109 Gamma offset -- Blue(adjust ColorTemp)
Z127 DLP Color Wheel delay
Z128 DLP Degamma Table
Z129 system works timer
Z131 R offset to RGBHD(AD9984)
Z132 G offset to RGBHD(AD9984)
Z133 B offset to RGBHD(AD9984)