Owner`s manual

VideoWall™/CineWall™ Installer/Integrator Manual 82
PR
E
LIM
INA
RY
98
preferred. source.detec-
tion
1288 =? 5X4
4X3
15X9
16X9
2.35X1
12
13
16
17
23
99
product [ST] 3 ?
Retrieves text: display product
name.
100
replies.sent 1139 RS232
AUX232
0
2
? 0 – 32767
Used only to indicate that replies
have been sent. Resets to zero
upon reaching its maximum
value.
101
reset.balance 1034 [execute]
Resets color balance values to
100/8 (white 100; gray 8).
102
resolution.horizontal 16401 =? [varies]
103
resolution.vertical 16402 =? [varies]
104
revision [ST] 4 ?
Retrieves text: firmware revision
number.
105
runtime.hours.high 1113 =? [hours / 10000]
Do not set lamp, runtime or sys-
tem hours/minutes unless
actual time was lost, such as
when electronics module is
replaced. Note: Product warran
-
ties are not based on these tim-
ers.
106
runtime.hours.low 4100 =? [hours mod 10000]
107
runtime.hours.reset 4613 [execute]
108
runtime.minutes 4101 =? 0 – 59
109
saturation 16396 =?+– 0 – 255
This controls color saturation.
Default value is 128. Used with
composite, S-video and compo
-
nent video sources.
Table 5-5. Operation and String Commands for VideoWall/CineWall (continued)
Row
Operation
or
String [ ST ]
Operation or
String
number
(Target)
Target or Target number must
be in parentheses.
( Target
number )
Command
types allowed
(Use only one
symbol)
Value
If numbers listed first, use num-
bers only. Data in [square
brackets] is for information only.
Value number
Notes
set
get
inc
dec