Owner`s manual

Maintenance and Troubleshooting
VideoWall™/CineWall™ Installer/Integrator Manual 55
PRE
L
IMINAR
Y
Status LEDs The LEDs on the electronics module can give
you more detailed information about the current
operational state of the VideoWall/CineWall. To
see them, open the screen.
Table 4-2 describes the VideoWall/CineWall LED status indications.
Table 4-2. VideoWall/CineWall Status LED Indications
LED Name
When the LED is...
Off Green Amber Red
Ready Lamp is on (or
no power)
Source Source absent Valid source
present
Source absent
or not valid
Lamp Lamp off Lamp on Lamp striking Lamp failed
Remote IR Not receiving IR
now
Receiving IR sig-
nal
Serial Data
No command
received
Received any
command
Serial Cmd Received com-
mand addressed
to “this” unit
Lamp Saver Lamp Saver not
active or lamp is
off
Lamp Saver
active
Source present
Lamp on
Active
Lamp is cooling
Source present
Lamp will come
on when cooled
Active
Source absent
Lamp off
Engine Status Optical engine
OK
Optical engine
fault or commu
-
nication failure
Ballast Status Lamp off Lamp on Ballast fault or
communication
failure
Fan-Lamp
Fan off Fan is running
Fan failed
recently but is
now running
Fan failedFan-DMD
Fan-System
Fan - System
Fan - DMD
Fan - Lamp
Ballast Status
Engine Status
Lamp Saver
Serial Cmd
Serial Data
Remote IR
Lamp
Source
Ready
DIGITAL DVI
DIGITAL HDMI
ANALOG
INPUT