Owner`s manual

Installation
VideoWall™/CineWall™ Installer/Integrator Manual 47
PRE
L
IMINAR
Y
Memory: What is Saved
and Where
Some parameters (values) are associated with a display “mode” – the horizontal and
vertical resolution and the vertical frequency of the incoming source picture. (There are
other characteristics that define the display “mode,” but those are the primary ones.)
Some parameters are associated with a physical input: Analog, Component, Digital DVI,
Digital HDMI, S-Video or Composite Video.
Some parameters are global; that is, they are not associated with a specific mode or
input. They are universal.
Table 3-2 lists all saved parameters and their associations.
Table 3-2. Saved Parameter Associations
Parameter
Saved to ISF
Memory
Global
Adjust Corners (Image Alignment) x
ASCII Response Term. x
ASCII Response Type x
Auto Codes x
Auto Lamp On x
Baud Rate x
Beeper x
Black Level: R, G, & B x
Brightness (video) x
Color Balance (all values) x
Contrast (video) x
Curtain Pattern x
Do Frequency x
Do Phase x
Do Position x
Frequency x
Gamma x
Group ID x
Hue x
Justify x
Lamp Saver x
Menu H Position x
Menu Timeout x
Menu V Position x
Overscan x