Owner`s manual

Installation
46 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
To manually recall a memory slot:
1. Press MENU.
2. Select Memory from the Main Menu.
3. Select Recall from the Memory Menu.
4. Navigate to the slot you want to recall. You can only land on slot numbers that are not
empty (have checks).
5. Press ENTER to open the Recall detail menu. If this slot number has exactly the same
settings are currently being used, a (Current) message appears on the top line.
6. The only line you can select is Recall Now. Press ENTER.
Recall
Slot to Recall 1
Recall Now
Name RGB 1024x768
Source Analog
Resolution 1024x768
Scale/Justify 16x9/Center
Position 328,4
Zoom UL/LR +1, +0 / -1, +2
Viewport UL/LR +0, +0 / +0, +0
Frequency/Phase 1344 / 0°
Sharpness 7
Black Level (Offset) 52 50 104
White Level (Gain) 178 131 135
The best practice is to recall settings from memory slots. It is faster.
Note