Owner`s manual

Installation
VideoWall™/CineWall™ Installer/Integrator Manual 45
PRE
L
IMINAR
Y
5. Navigate to an unchecked slot number, or to a checked slot if you want to overwrite
what’s already saved. Press ENTER.
6. This menu shows all the data that will be saved. You can change the slot name in this
menu but you can’t change anything else.
7. To save immediately, press ENTER. The appearance of this menu is somewhat
different for digital and video sources, reflecting what is saved for them.
To change the name of the memory slot: The default memory slot name is an
abbreviated description of its contents. If your customer wants or needs a more
descriptive name, select the Name line and press ENTER.
Use the left-right arrow keys to navigate along the line. Use the up-down keys to change
the character at that point. Press PREV when finished. Then select Save Now and press
ENTER again. If you have RS232 control, there are commands to send a string name to a
memory slot, saving time.
Save
Save to Slot 1
Save Now (Overwrite)
Name RGB 1024x768
Source Analog
Resolution 1024x768
Scale/Jus tify 16x9/Center
Position 328,4
Zoom UL/LR +1, +0 / -1, +2
Viewport UL/LR +0, +0 / +0, +0
Frequency/Phase 1344 / 0°
Sharpness 7
Black Level (Offset) 52 50 104
White Level (Gain) 178 131 135