Owner`s manual

Installation
42 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
2. Select Blue Only from the Input Levels menu and press ENTER.
3. Select Saturation from the Input Levels menu.
4. Adjust the color saturation level until the outermost (gray and blue) color bars appear
to be a single shade of blue:
Hue: Hue or “tint” is essentially the ratio of red to green in the color portion of the image.
When
Hue is decreased, the image appears redder; when it is increased the image
appears greener. To set the tint:
1. Select Blue Only from the Input Levels menu and press ENTER.
2. Select Hue from the Input Levels menu.
3. Adjust the tint level until the cyan and magenta color bars (on either side of the green
bar) appear to be a single shade of blue.
Like the Brightness and Contrast controls, the Saturation and Hue
controls are interactive. A change to one may require a subtle change
to the other in order to achieve the optimum setting.
gray
yellow
cyan
green
magenta
red
blue
Note