Owner`s manual

Installation
VideoWall™/CineWall™ Installer/Integrator Manual 41
PRE
L
IMINAR
Y
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the
one shown in
Figure 3-9.
Figure 3-9. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast from the Picture menu and press ENTER. Adjust the contrast to a point
just below which the white rectangle starts to increase in size.
Saturation:
1. On your external test pattern source, select a color bar pattern like the one shown in
Figure 3-10.
Figure 3-10. Typical Color Bar Pattern for Adjusting Color Saturation and Hue
Brightness and Contrast controls are interactive. A change to one
may require a subtle change to the other in order to achieve the
optimum setting.
Note
gray
yellow
cyan
green
magenta
red
blue