Owner`s manual

Installation
38 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
The best way to adjust levels is the semi-automatic method.
Adjusting levels semi-automatically: This is quick and easy if you can get a black
picture and a white picture from the source computer.
1. Display a white picture from the source. This must come from the computer
source that will be used for the program. It does no good to use your laptop for
this adjustment, then connect to a different computer for the program. Nor can you
use the VideoWall/CineWall internal white test pattern.
2. Press MENU.
Make a white screen using the Windows
®
Paint program.
Main Menu
Picture
Size & Position
Aspect Ratio
Memory
ISF Memories
Program Information
Picture
Source Analog
Sync Type Separate H&V
Vertical Frequency 60 Hz
Horizontal Frequency 43.36 kHz
Pixel Frequency 66.02 MHz
Node iD: 123 HPer: 1563 VLines: 1066
Horizontal Resolution 1280
Vertical Resolution 768
Frequency 1344
Phase 22.5°
Sharpness 7
Input Levels
Input Levels Menu – Analog Sources
Input Levels
Auto White Level (Gain)
Center Point 2 1 4
Black Level (Offset) - All 55
Red 55
Green 55
Blue 55
White Level (Gain) - All 127
Red 127
Green 127
Blue 127
Tip