Owner`s manual

VideoWall™/CineWall™ Installer/Integrator Manual 21
PRE
L
IMINAR
Y
3.1
Overview
Table 3-1 gives a quick overview of the VideoWall/CineWall installation process. The
sections following this one provide detailed instructions.
3. Installation
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1 Install Top Flange and Bottom Brackets on Chassis
Assembly
22
2 Place Chassis Assembly with brackets installed into
opening in dedicated wall
23
3 Secure Chassis Assembly to wall 23
4 Connect signal sources to the VideoWall/CineWall 26
5 Connect PC or control system to VideoWall/CineWall via
RS-232
28
6 Connect AC power to the VideoWall/CineWall 29
7 Install Screen Assembly:
• Fix screen in open position using fold-out strut
• Secure top of screen frame to hinge with safety catches
29
8 Power up the VideoWall/CineWall:
• Set main power switch to ON
• Close screen
• Turn on source components
• Use remote control to turn on system
32
10 Align image corners with screen corners 33
11 Adjust color balance 34
12 Adjust input levels for each individual source 37