Owner`s manual

Installation Preparation
14 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
2.2
Unpacking and
Inspecting
When you receive your VideoWall/CineWall shipment, check the shipping containers for
damage. If there are signs of damage or rough handling, it is recommended that you have
an agent of the carrier present when the equipment is unpacked. If the shipping
containers do not appear to be damaged, move them to the installation site before
opening them.
As you unpack each container, check all parts against the shipping documents. The
VideoWall/CineWall is protected in the shipping containers. Unpack them carefully,
inspecting the chassis and screen for scratches, dents or other signs of damage. If the
equipment is damaged, save all packing materials and notify both Runco and the carrier
immediately.
Proceed as follows to unpack your VideoWall/CineWall:
1. Remove the top of the shipping container for
the chassis and associated hardware.
2. Lift the box containing the hardware up off of
the foam inserts and set it aside.
3. Remove the foam inserts on
the top corners of the chassis
and set them aside.
Hardware Box
Foam Inserts