Owner`s manual

Installation Preparation
VideoWall™/CineWall™ Installer/Integrator Manual 13
PRE
L
IMINAR
Y
Also confirm that doorways and elevators (if used) provide sufficient clearances:
Environmental
Considerations
Here are some other considerations and tips that can help improve your installation, avoid
damage, prevent personal injury and prolong operating life:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the display away
from heating and/or air conditioning vents. Changes in temperature may cause drifts in
the display circuitry, which may affect performance.
• Keep the VideoWall/CineWall away from devices that radiate electromagnetic energy
such as motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
• Handle the unit carefully when installing or carrying it. Use the built-in handles; DO NOT
touch or hold the screen face.
• Set the unit away from heat, excessive dust, and direct sunlight.
• Protect the inside of the unit from liquids and small metal objects.
• Do not hit or scratch the screen surface as this causes flaws on the surface of the
screen.
• DO NOT spray liquid of any kind on the screen. It can drip down the screen and
wick up between the layers. When liquid gets between the screen layers, it is
impossible to remove and the screen is ruined!
Do not store or transport the VideoWall/CineWall on its side! It
should only be placed on its side if absolutely necessary during
loading and unloading.
min. 2,000 mm
min. 900 mm
Depth
Height
Width
900
2,000
2,800
900
1,700
2,700
900
2,700
1,700
900
2,800
2,000
Minimum Doorway/Elevator Clearances
WARNING