Owner`s manual

Introduction
6 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
Input Connectors and
LEDs
The VideoWall/CineWall interface board provides connections for up to six video sources,
as well as an RS-232 serial connection for personal computer (PC) or automation/control
system interface.
For a list of supported display modes on each input, refer to Supported Timings on
page 119.
1. RS-232
A female, RJ-45 connector for
interfacing with a PC or
automation/control system. For
more information, refer to
Serial
Communications on page 57.
2. DIGITAL (DVI)
3. DIGITAL (HDMI)
Two (2), HDCP-compliant digital
video inputs for connecting a DVD
player, personal computer or HD
tuner with a DVI or HDMI output.
4. ANALOG (RGB)
A 15-pin VGA connection to a
personal computer. The
VideoWall/CineWall automatically
detects the signal resolution.
5. STATUS LEDs
These provide information about
the current state of various
VideoWall/CineWall system
components. For information on
how to interpret them, refer to
Status LEDs on page 55.
6. COMPONENT
Standard- or high-definition,
YPrPb component input from a
DVD player, gaming console or
other component video source.
7. S-VIDEO
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
8. COMPOSITE
Standard composite video input for connecting a VCR, camcorder, laser disc player or
other composite video source.
➤
Fan - System
Fan - DMD
Fan - Lamp
Ballast Status
Engine Status
Lamp Saver
Serial Cmd
Serial Data
Remote IR
Lamp
Source
Ready
Option Key
DVI TO ENGINE
POWER +5V OUT IR SENSOR CUBE CONTROL
ICP AUX
RS-232
DIGITAL DVI
DIGITAL HDMI
ANALOG
COMPONENT
S-VIDEO
COMPOSITE
INPUT
RS-232
1
2
3
4
5
6
7
8