Owner`s manual

Reference
VideoWall™/CineWall™ Installer/Integrator Manual 111
PRE
L
IMINAR
Y
Advanced OptionsTo adjust the lamp, configure the serial communications port and perform numerous other
advanced, installation-related tasks, select
Advanced Options from the Main Menu.
Color Balance: Refer to Color Balancing the VideoWall/CineWall on page 34.
• Color Temperature: To choose a color temperature setting, highlight Color
Temperature from the Color Balance menu. (Color temperature defines the “color of
gray.”) The choices are 3200K, 5500K, 6500K, 8500K and Native.
The fixed temperatures have preset values for all the White and Gray settings. Native is
not fixed but equates to a color temperature of approximately 9,000K. The 6500K
setting is appropriate for most situations. Higher settings produce a “bluer” picture;
lower ones impart a reddish hue to the image.
You must enter a passcode to access the Advanced Options
menu. Otherwise, it is hidden. To obtain this passcode, contact
Runco Technical Support.
Advanced Options
Color Balance
Miscellaneous Options
Lamp Settings
Serial Port Settings
Auto Setup Options
Image Alignment
Menu Options
Color Balance
Color Temperature 6500K
White Balance (Gain) - All
Red 100
Green 70
Blue 53
Gray Balance (Offset) - All
Red 15
Green 13
Blue 7
Test Pattern Off
Hide Menu
Copy to Clipboard
Recall From Clipboard
Reset to Defaults
Gamma Film
White Boost Off
Note