Owner`s manual

Reference
VideoWall™/CineWall™ Installer/Integrator Manual 107
PRE
L
IMINAR
Y
Save: In the Save grid, use the arrow keys to cycle through the available memories. As
you navigate through all 40 memories, Save Now will show (Overwrite), as shown here, if
the slot already has something in it.
For each empty memory, the Name of the memory is the default name for this slot. You
can change this name as described below. Most items are grayed out because you can’t
change anything here except the memory slot name.
(Overwrite) appears if the Save to Slot number currently has something saved in it.
To save, highlight Save Now and press ENTER.
A (Current) notice will appear in Save to Slot to indicate that the save was successful and
that the slot now contains the settings that the VideoWall/CineWall is currently using.
To change the Name of a memory slot, highlight Name and press ENTER. A bar appears
below the name indicating the character position. Press
or to move the yellow
highlight in this bar. Press or to change the character at that position. Memory slot
names can be up to 24 characters long.
The default memory slot name is an abbreviation of the memory contents (input and
resolution); for example, HDM
1920x1080.
Delete: The Delete menu looks like the Recall menu. You do not need to delete a memory
slot before saving something new.
Save
; 1
 9  17
 25  33
; 2 ; 10
 18  26
 34
; 3
 11  19  27  35
; 4
 12  20  28  36
 5  13  21  29  37
 6  14  22  30  38
; 7
 15  23  31  39
 8  16  24  32  40
Save
Save to Slot 1
Save Now (Overwrite)
Name RGB 1024x768
Source Analog
Resolution 1024x768
Scale/Jus tify 16x9/Center
Position 328,4
Zoom UL/LR +1, +0 / -1, +2
Viewport UL/LR +0, +0 / +0, +0
Frequency/Phase 1344 / 0°
Sharpness 7
Black Level (Offset) 52 50 104
White Level (Gain) 178 131 135