Owner`s manual

Reference
104 VideoWall™/CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
Justify: Justify moves the picture to the top-left corner, center or bottom-right corner of
the screen.
Overscan: Some SDTV/EDTV programs are produced based on the assumption that
older television sets may not display the outer edges of the broadcast picture area.
Overscan effectively hides these inactive, outer edges of the image.
Select up to 20% of overscan, as needed. (For HDTV, DVDs and other sources, overscan
is generally not necessary or desirable.)
One To
One
Select One to One to dis-
play the source signal in
its native resolution, with
no re-sizing or overscan.
This means, for exam-
ple, that 720p HDTV pro-
grams will display with
unused pixels on all
sides: 320 on the left and
right sides and either 180
(VW-100HD) or 48
(CW-95HD) above and
below.
16:9
4:3
Table 6-1. Scale Mode Settings (continued)
Aspect
Ratio/
Scale
Mode
Setting
Description
Aspect
Ratio of
Source
Signal
Geometry of Projected Image (Note)
VW-100HD (16:9 Screen) CW-95HD (2.35:1 Screen)
Note: These illustrations show the image position when Justify is set to Center.
1080i HDTV Image
720p HDTV Image
1080i HDTV Image
720p HDTV Image
480i
SDTV
Image
1024x768 PC Image
480i SDTV Image
1024x768 PC Image
Certain combinations of resolution and Scale Mode (for example,
1920x1080 and One to One, or any resolution with Fill Screen) do not
allow the
Justify setting to be changed.
Note