Owner`s manual

Reference
VideoWall™/CineWall™ Installer/Integrator Manual 93
PRE
L
IMINAR
Y
Main MenuThe Main Menu is the starting point for accessing all VideoWall/CineWall functions.
PictureUse the controls in the Picture menu to calibrate your VideoWall/CineWall for optimum
picture quality. To access the Picture menu, press MENU, highlight Picture and press
ENTER.
To adjust a setting, use the or button to highlight it and press ENTER. Use the
or button to change the setting.
The Picture menu has different items depending on the current source type. You cannot
adjust Frequency in Digital pictures, so that item is not in the Picture menu when the
selected source is HDMI or Digital.
You cannot adjust Horizontal Frequency for VGA or Component sources, because that is
determined by the source, so it is grayed out.
In the Source line, the left-right keys choose the source. Other items can be adjusted if
they are not grayed out.
You must enter a passcode to access the Memory, Diagnostics
and Advanced Options menus. Otherwise, they are hidden.To
obtain this passcode, contact Runco Technical Support.
Main Menu
Picture
Size & Position
Aspect Ratio
ISF Memories
Memory
Diagnostics
Advanced Options
Program Information
Note
Picture Menu – Analog Sources
Picture
Source Analog
Sync Type Separate H&V
Vertical Frequency (frame locked) 60 Hz
Horizontal Frequency 43.36 kHz
Pixel Frequency 66.02 MHz
Node iD: 123 HPer: 1563 VLines: 1066
Horizontal Resolution 1280
Vertical Resolution 768
Frequency 1344
Phase 22.5°
Sharpness 7
Input Levels