O R P 2 E L G A E T H IN G M A C N U R L A NU E S U A M R
Connection * Unplug the 5D-OSD menu cable after OSD setting.
21mm Dimensions & Installation 1 Nylon Gaskets 2 M2*4 Screws 3 M3*5 Screws 4 M3 Non-slip Nuts Model: Night Eagle 2 Pro 3 3 4 4 26mm GND OSD MIC 5-36V GND Video Audio VBAT+ 3.
OSD Menu · Voltage Calibration 16.8v RunCam 01:08 · Quick settings: Long press the LEFT/DOWN/RIGHT button for 2 seconds to activate the VOLTAGE/PILOT /TIMER, then you can use the UP, DOWN, LEFT and RIGHT buttons to move it to the appropriate location on the screen, and press the CENTER button to exit.
OSD Menu OSD Setting: Press and hold the UP button for 2 seconds to enter OSD setup menu. · PILOT: ON/OFF · TIMER: ON/OFF · VOLTAGE: ON/OFF · BASELINE: OFF/1-9 · EXIT: Save the current settings and exit RunCam 1234567890ABCDEFG HIJKLMNOPQRSTUVWX YZa b c d e f g h i j k l m n o pqrstuvwxyz.-:/@ PILOT TIMER VOLTAGE BASELINE DEFAULT EXIT ON ON ON OFF · Customize the PILOT name: Use the UP, DOWN, LEFT and RIGHT buttons to navigate through the letters and confirm with the CENTER button.
Camera Menu MAINMENU IMAGE VIDEO STANDARD LANGUAGE LOAD DEFAULT SOFT VERSION SAVE&EXIT EXIT IMAGE PAL-50HZ ENGLISH · VIDEO STANDARD (PAL-50Hz/NTSC-60Hz) · LANGUAGE (English/ ) MAX GAIN WDR IMAGE ENHANCE MIRROR BRIGHTNESS ZOOM IN RETURN · MAX GAIN (9 / 1-9) · WDR (ON/OFF) · MIRROR (OFF/ON) · BRIGHTNESS (36 / 8-250) · ZOOM IN (0 / 0-5) 9 ON OFF 36 0
Camera Menu IMAGE ENHANCE SHARPNESS SATURATION RETURN · SHARPNESS (AUTO/MANUAL: 0-15) · SATURATION (AUTO/MANUAL: 0-15)
Model RunCam Night Eagle 2 PRO Image Sensor 1/1.8" CMOS Sensor Horizontal Resolution 800TVL Lens FOV 140 2.5mm Screen Format 4:3 Signal System NTSC/PAL Switchable on OSD menu Integrated OSD Yes Integrated MIC Yes S/N Ratio >50dB Electronic Shutter Speed Auto Max Gain 1-9 Min. Illumination 0.00001Lux/F1.
www.runcam.
