Instructions / Assembly

7 8

CONSTRUCTION INSTALLATION CONSTRUCTION INSTALLATION

Fig.4

3000K

4000K

5000K

SELECTABLE

HIGH

MED

LOW

CCT

LUNEN

ADJUSTABLE

Fig.5

Fig.6

 The junction box is fixed on the ceiling bracket.

For wet location installation, after fixture is installed on ceiling , put silicone glue to

seal the gap between fixture and ceiling.



4. Use the color temperature toggle switch

to select your desired lamp color tempera-

ture-Warm white(3000K), Cool white

(4000K) or Daylight (5000K). Use the

lumen and wattage adjustable toggle switch

to adjust low(50%),medium(75%) or

high(100%) (Fig 4)

5. Squeeze the two housing clips so they

are in an upright position and insert lamp

into housing (Fig.5).

6. Once lamp is inside the housing, release

the housing clips and continue pushing

lamp into housing lamp into housing until

securely fixed and with ceiling (Fig.6).