Data Sheet

11
252
HCS
HCS
HCS
HCS
HCS
HCS
HCS
HCS
HCS
Explanation of symbols from page 317
Application range:
Plywood and wood-fibre board up to 30,0 mm
thickness . Insulating materials, acrylic glass up to 6,0 mm,
cooled with water. Pressed material, hard fabric up to 4,0 mm
thickness , cardboard, linoleum up to 6,0 mm
thickness , cooled with water.
Application range:
Hardwood, softwood, plywood and wood-fibre boards up to 50,0 mm
thickness , clean cut,
suitable for slots and grooves. Various soft plastics up to 30,0 mm, clean cuts.
Application range:
Hardwood, softwood, plywood and wood-fibre board up to 60,0 mm.
Parallel cuts and clean cuts. Various soft plastics up to 25,0 mm
thickness , clean cuts.
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
77,0 7,8 1,0 2,0 13 Tpi 321 8005 5 323 8005 20
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
100,0 7,9 1,3 4,0 6 Tpi 321 8007 5 323 8007 20
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
100,0 7,5 1,5 4,0 6 Tpi 321 8002 5 323 8002 20
RUKO 8005 HCS
RUKO 8007 HCS
RUKO 8002 HCS
Standard saw blade, wavy set.
Tapered blade, ground teeth.
Fast and rough cut. Narrow blade suitable for profiled cuts.
Tapered blade, ground teeth. Clean and fast cut.
mm
mm
mm
Blades to replace *
Bosch® T 119 B I Metabo® 23 631
MP.S® 3108 I Wilpu® HW 12 I AEG® 274-353
Blades to replace *
Bosch® T 101 D I Metabo® 23 635
MP.S® 3105 I Wilpu® HGS 24 I AEG® 274-351
Blades to replace *
Bosch® T 101 DP I Metabo® 23 971
MP.S® 3111 F I Wilpu® MG 11 bi I AEG® 340-011
mm
mm
mm
mm
mm
mm
T-shank jig-saw blades for power tools
by Bosch
®
, Metabo
®
, MP.S
®
, Wilpu
®
, Atlas Copco
®
/ AEG
®
etc.