SAW PROGRAM
Length mm Height mm Thickness mm Tooth spacingteeth per mm Tooth spacing teeth per inch Article no.
Main application Right-angled cuts Clean cuts Straight cuts Plywood Blockboard Chipboard Hardwoods and softwoods Wood with nails embedded Profiled cuts Sandwich materials Profiled section Plastics Laminated / coated boards Stainless steel Sheet steel Non-ferrous metals Aluminium Steel Iron 11 245
Length mm Height mm Thickness mm Tooth spacingteeth per mm Tooth spacing teeth per inch Article no.
Main application Right-angled cuts Clean cuts Profiled cuts Plywood Blockboard Chipboard Hardwoods and softwoods Wood with nails embedded Pruning Porous concrete Profiled section Plastics Pipe Stainless steel Sheet steel Non-ferrous metals Aluminium Steel Iron 11 247
11 T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® T 118 B I Metabo® 23 638 MP.S® 3113 I Wilpu® MG 12 I AEG® 254-064 HSS RUKO 8011 HSS steel Standard saw blade, wavy set. Application range: St 37 up to 4,0 mm thickness, non-ferrous metals, aluminium 3,0 - 10,0 mm cooled with RUKO cutting spray. Hard plastics, acrylic glass 3,0 - 8,0 mm, Pertinax, Resitex. Asbestos cement 2,0 - 4,0 mm. Eternit up to 10,0 mm, cooled with water.
T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. 11 Blades to replace * Bosch® T 118 G I Metabo® 23 636 MP.S® 3110 I Wilpu® MG 107 I AEG® 274-652 HSS RUKO 8012 HSS steel Standard saw blade, wavy set. For thin sheet steel. Application range: Thin-gauged sheet and profiled section less than 1,0 mm. St 37, non-ferrous metals, aluminium up to 2,0 mm. Armoured plastics, acrylic glass, cooled with water.
11 T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® T 318 A I Metabo® 23 629 MP.S® 3114 I Wilpu® MG 31 bi I AEG® 274-654 HSS RUKO 8016 HSS steel Standard saw blade, extra long, wavy set. Application range: Profiled section, mild steel, aluminium 1,5 - 4,0 mm, composite materials, sandwich materials up to 70,0 mm. Insulation materials.
T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall 11 Blades to replace * Bosch® T 318 BF I Metabo® 23 979 MP.S® 3115 F I Wilpu® MG 32 bi I AEG 274-653 RUKO 8020 HSS bi-metal Standard saw blade, side set. Application range: Profiled section, pipe up to Ø 60,0 mm with wall thickness 3,0 - 10,0 mm, non-ferrous metals, high-alloyed chromium steel such as stainless and acid-resistant steel. Wood with nails, acrylic glass, armoured plastics.
11 T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® T 119 B I Metabo® 23 631 MP.S® 3108 I Wilpu® HW 12 I AEG® 274-353 HCS RUKO 8005 HCS Standard saw blade, wavy set. Application range: Plywood and wood-fibre board up to 30,0 mm thickness. Insulating materials, acrylic glass up to 6,0 mm, cooled with water. Pressed material, hard fabric up to 4,0 mm thickness, cardboard, linoleum up to 6,0 mm thickness, cooled with water.
T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. 11 Blades to replace * Bosch® T 144 D I Metabo® 23 633 MP.S® 3104 I Wilpu® HGS 14 I AEG® 213-116 HCS RUKO 8006 HCS Blade sharpened and side set. Fast and rough cut. Application range: Hardwood and softwood up to 60,0 mm thickness. Fast and rough cut. Polystyrene, polyamide, soft plastics up to 50,0 mm thickness and plexiglas up to 30,0 mm thickness, cooled with water.
11 T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® T 101 B I Metabo® 23 634 MP.S® 3101 I Wilpu® HC 12 I AEG® 254-061 HCS RUKO 8001 HCS Tapered blade, ground teeth. Clean and fast cut. Application range: Hardwood, softwood, plywood and wood-fibre board up to 50,0 mm thickness. Suitable for slots and grooves. Various soft plastics up to 20,0 mm thickness.
T-shank jig-saw blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. 11 Blades to replace * Bosch® T 301 DL I MP.S® 3104 L Wilpu® HGS 34 HCS RUKO 8024 HCS Tapered blade, ground teeth. Very clean and fast cut. Application range: Hardwood and softwood, plywood and wood-fibre boards up to 70,0 mm, clean and fast cut, suitable for slots and grooves. Various soft plastics up to 40,0 mm, clean cut.
11 Jig-saw blades for pneumatic body saws by SIG®, FLEX® and Wieländer+Schill® Bi HSS Metall Blades to replace * CS 118 BF RUKO 8814 HSS bi-metal For thin steel sheet such as car body panels. Application range: St 37, non-ferrous metals up to 2,5 mm thickness. Wood, plastics, hard fabrics.
Jig-saw blades for pneumatic body saws by Ober®, Chicago Pneumatic®, Shinano®, Facom® and Pneutec® Bi HSS Metall 11 Blades to replace * CC 118 AF RUKO 8811 HSS bi-metal For thin steel sheet such as car body panels. Application range: St 37, high-alloyed chromium steel such as stainless and acid-resistant steel, non-ferrous metals up to 2,0 mm thickness. Suitable for profiled cuts.
11 Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® S 518 EHM TC RUKO 8939 TC Toothing ground. Application range: Inox sheeting from 2,0 - 4,0 mm material thickness, Inox profiles from Ø 2,0 - 50,0 mm, FRP / epoxy from 2,0 - 15,0 mm. For material with reduced stroke rate and cooling, work without oscillation.
Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall 11 Blades to replace * Bosch® S 922 EF I Metabo® 31132 MP.S® 4401 I Wilpu® 3014-150 I AEG® 354-792 RUKO 8908 HSS bi-metal Toothing crossed and milled. Application range: Thin sheeting from 1,5 - 4,0 mm material thickness, pipes and profiles Ø 5,0 - 100,0 mm.
11 Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall Blades to replace * Bosch® S 1122 BF I Metabo® 31135 / 31485 MP.S® 4415 I AEG® 354-790 I Wilpu® 3013-250 RUKO 8916 HSS bi-metal Toothing crossed and milled. Application range: Thin sheeting from 3,0 - 8,0 mm material thickness, solid pipes and profiles from Ø 10,0 - 175,0 mm. Flexible, flush and fast cut.
Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall 11 Blades to replace * Bosch® S 920 CF I AEG® 373-247 RUKO 8986 HSS bi-metal Toothing crossed and milled. Application range: Plates from 4,0 - 10,0 mm, solid pipes and profiles from Ø 20,0 - 100,0 mm. Ideal for pipe cutting equipment, rescue and demolition work. Powerful, coarse cut.
11 Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall Blades to replace * Bosch® S 611 DF I Metabo® 31985 MP.S® 4016 I AEG® 354-775 I Wilpu® 3021/150bi RUKO 8917 HSS bi-metal Toothing crossed and milled. Application range: Wood with nails, metal, chipboard from 10,0 - 100,0 mm material thickness, plastic profiles from Ø 5,0 - 100,0 mm, solid plastics/ FRP from 8,0 - 50,0 mm, wood and metal window frames. Especially suitable for plunge cuts.
Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall 11 Blades to replace * Bosch® S 1022 HF I Metabo® 31932 Wilpu® 3018-200 I MP.S® 4431 RUKO 8909 HSS bi-metal Toothing crossed and milled. Application range: Wood with nails and metal from 5,0 - 150,0 mm material thickness, metal sheeting, pipes, aluminium profiles from 3,0 - 12,0 mm and pallets.
11 Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall Blades to replace * Bosch® S 1125 VF I AEG® 323-813 RUKO 8933 HSS bi-metal Toothing crossed and milled. Application range: Wood with nails and metal from 5,0 - 175,0 mm material thickness, metal sheeting, aluminium profiles from 3,0 - 10,0 mm and plastic profiles from Ø 3,0 - 175,0 mm.
Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Bi HSS Metall 11 Blades to replace * Bosch® S 1222 VF I Metabo® 31125 / 31475 MP.S® 4432 I AEG® 354-778 I Wilpu® 3021/300 bi RUKO 8910 HSS bi-metal Toothing crossed and milled. Application range: Wood with nails and metal from 5,0 - 250,0 mm material thickness, metal sheeting, aluminium profiles from 3,0 - 10,0 mm and plastic profiles from Ø 3,0 - 250,0 mm. Flexible, flush cut.
11 Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. Blades to replace * Bosch® S 828 D I Metabo® 31136 MP.S® 4014/4060 I Wilpu® 3025-150 I AEG® 318-131 HCS RUKO 8903 HCS Toothing crossed. Application range: Specifically for various plaster and Rigips panels from 8,0 - 100,0 mm. Wood, Eternit and plastics.
Reciprocating blades for power tools by Bosch®, Metabo®, MP.S®, Wilpu®, Atlas Copco® / AEG® etc. 11 Blades to replace * Bosch® S 1111 K I Metabo® 31125 / 31475 MP.S® 4432 I AEG® 354-778 I Wilpu® 3021/300 bi HCS RUKO 8923 HCS Toothing crossed and milled. Application range: Coarse and nail-free wood from 20,0 - 175,0 mm, firewood from Ø 20,0 - 175,0 mm.
11 HSS-Co Bihart cobalt hacksaw blade Bi HSSCO Metall This HSS bi-metalic hacksaw blade is made of two different types of steel. The cutting edge is made of hard HSS molybdenum steel and the saw blade body is made of alloyed heat-treated steel. The combination of the two types of steel in one saw blade makes the hacksaw blade extremely wear-resistant, unbreakable and gives it outstanding cutting durability. Suitable for all common materials. The ideal blade for high demands. RUKO Art.
Reference table for RUKO reciprocating blades 11 Competitive blades may vary from our specifications. 33189015 Bosch® D+N® Gematic® Hawera® Metabo® MP.
11 Reference table for RUKO reciprocating blades Competitive blades may vary from our specifications. Flex® 33189015 — Wilpu® 3018-150 Atlas Copco® Makita® Milford® AEG® Hitachi® Rockwell® 318-127 — M 88176 / R12415 Lenox® Rothenberger® 20562-610R — 33189035 200.786 3025-150 318-131 / 323-801 M 0.30.20 / H 983 605 Z M 87945 20560-606R — 33189045 201.936 3021-300 318-125 / 323-802 M 0.30.21 M 88010 / R12403 20585-156R — 33189055 200.751 3019-150 354-779 M 0.30.
