Data Sheet

11
248
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HSS
HSS
Explanation of symbols from page 317
Application range: St 37 up to 4,0 mm thickness, non-ferrous metals, aluminium 3,0 - 10,0 mm cooled
with RUKO cutting spray. Hard plastics, acrylic glass 3,0 - 8,0 mm, Pertinax, Resitex. Asbestos cement 2,0 - 4,0 mm.
Eternit up to 10,0 mm, cooled with water.
Application range: St 37, non-ferrous metals. Suitable for profiled cuts. Suitable for glass-fibre reinforced plastics up to
4,0 mm thickness, acrylic glass up to 8,0 mm, cooled with water. Pressed materials, hard fabrics, insulation materials
up 8,0 mm thickness, cooled with water.
Application range: St 37, non-ferrous metals, aluminium up to 4,0 mm thick, high-alloyed chromium steel such as
stainless and acid-resistant steel sheet up to 2,0 mm. Hard and softwood, insulation material up to 8,0 mm.
Suitable for glassfibre reinforced plastics up to 2,0 mm, acrylic glass, pressed materials, hard fabrics,
cooled with water.
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
77,0 7,5 1,0 2,0 13 Tpi 321 8011 5 323 8011 20
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
75,0 6,0 1,0 1,2 21 Tpi 321 8009 5 323 8009 20
Tooth spacing
teeth per mm
Tooth spacing
teeth per inch
77,0 7,7 1,0 1,2 21 Tpi 321 8010 5 323 8010 20
RUKO 8011 HSS steel
RUKO 8009 HSS steel
RUKO 8010 HSS steel
Standard saw blade, wavy set.
Standard saw blade, wavy set. Narrow blade suitable for profiled cuts.
Standard saw blade, wavy set. Narrow blade suitable for profiled cuts.
mm
mm
mm
Blades to replace *
Bosch® T 118 B I Metabo® 23 638
MP.S® 3113 I Wilpu® MG 12 I AEG® 254-064
Blades to replace *
Bosch® T 218 A I Metabo® 23 647
MP.S® 3112 I Wilpu® MG 21 I AEG® 254-063
Blades to replace *
Bosch® T 118 A I Metabo® 23 637
MP.S® 3111 I Wilpu® MG 11 I AEG® 254-063
mm
mm
mm
mm
mm
mm
T-shank jig-saw blades for power tools
by Bosch
®
, Metabo
®
, MP.S
®
, Wilpu
®
, Atlas Copco
®
/ AEG
®
etc.