Data Sheet

226

L1L1

25.000 r.p.m

113 l / min

3/8"

77 dB (A)

0.57

6.2 bar

Ø 6.0 mm

20.000 r.p.m

113 l / min

3/8"

77 dB (A)

0.60

6.2 bar

Ø 6.0 mm

Explanation of symbols from page 316

Pneumatic grinder (short)

The RUKO pneumatic grinder in the short design - The compact, fast tool for deburring, polishing

and machining welding seams!

The RUKO pneumatic grinder has a rubberised, non-slip handle, which absorbs vibration and pro-

tects the user from slipping off whilst working. The speed can be adjusted by a governor on top

of the handle. It has a tool adapter made of hardened steel. The exhaust air is directed backwards

through the handle by means of a 360° rotational principle. The RUKO pneumatic grinder features

an integrated air filter, which protects the motor from dirt that could get into the inside with the

compressed air.

Connection adapter included!

Pneumatic grinder (90° angle head)

The RUKO pneumatic grinder with 90° angle head - The compact, fast tool for deburring, polishing

and machining welding seams!

The RUKO pneumatic grinder has a rubberised, non-slip handle, which absorbs vibration and pro-

tects the user from slipping off whilst working. The speed can be adjusted by a governor on top

of the handle. It has a tool adapter made of hardened steel. The exhaust air is directed backwards

through the handle by means of a 360° rotational principle. The RUKO pneumatic grinder features

an integrated air filter, which protects the motor from dirt that could get into the inside with the

compressed air. The 90° angle head makes it easier to work in tight and difficult to reach places.

Ø Article no.

Pneumatic grinder (short)

157,0 G 1/4" 116 100 L 1

Ø Article no.

Pneumatic grinder (90°) 162,0 G 1/4" 116 110 L 1

Packing unit: individual cartons