Data Sheet

08
195
Ø1
L1
Ø2
HSS
HSS
HSS
30,0 mm
30,0 mm
HSS
RS5e / RS10 / RS25e / RS40e
RS125e / RS126e / RS140e
RS5e / RS10 / RS25e / RS40e
RS126e / RS140e
Main application Other application
Thespiral-groovedgeometrywith3cuttingedgesensuresextremelyhighstabilityofthe"Solid
3S"soliddrill,thuspreventingtheriskofbreakageofthecuttingedgesbyoverloadingorjamming
of the chips.
Thankstothehighstability,theservicelifeofthe"Solid3S"isconsiderablyincreased.
This reduces the costs of use.
The"Solid3S"enablesdrillingtofulldimensionwithoutcentringor
pre-drilling.The"Solid3S"canbegroundmoresimplythancoredrillsofthesamediameter.
Solid drills „Solid 3S“ with weldon shank (3/4")
and 3 cutting edges, cutting depth 30,0 mm
Solid drills „Solid 3S“ with weldon shank (3/4")
and 3 cutting edges in steel case
Packing unit: in plastic tubes of 1
Ø1
mm
Ø2
mm
L1
mm
Cutting depth
mm
10,0 19,0 64,0 30,0 108 1210 1
11,0 19,0 64,0 30,0 108 1211 1
12,0 19,0 64,0 30,0 108 1212 1
13,0 19,0 64,0 30,0 108 1213 1
14,0 19,0 64,0 30,0 108 1214 1
15,0 19,0 64,0 30,0 108 1215 1
Description
6- piece set of solid drills „Solid 3S“ HSS
Ø 10,0 mm - 11,0 mm - 12,0 mm - 13,0 mm -
14,0 mm - 15,0 mm
108 830
Steel (N/mm2) < 900
Steel (N/mm2) < 1100
Steel (N/mm2) < 1300
Rust-resistant steel
Aluminium
Brass
Bronze
Plastics
Cast iron
Titanium alloyed
Reduces the risk of breakage
compared to core drills up to
Ø 15.0 mm.
Coolingrequired.