DEBURRING PROGRAM
Packing unit Article no.
Main application Other application Polystyrene Polytetrafluoroethylene Poly carbonate Polypropylene Polyethylene Polyphenylene oxide Polyvinyl chlorid (PVC) Polyamid (PA) Polyacetal Brass Copper Aluminium Cast iron Sheet metal Steel Rust-resistant steel 12 273
A Unigrat „Universal Handle” This handle fits all holders B-C-D-E-F. With the locking head withdrawn, the steel holders can be adjusted up to 100,0 mm in length and can be locked in any position. The replacement blades fit in the bottom cavity of the handle. L1 12 Packing unit: in plastic pack Universal handle A L1 mm Article no. 150,0 107 010 1 B Unigrat „Blade B” Packing unit: in plastic pack Article no.
D Unigrat „Blade D" 12 Packing unit: in plastic pack D80 Article no. D80 Reversible tungsten-carbide insert for blunt scraping and deburring sheet metal up to 3,0 mm thickness. 6 cutting edges. 107 023 1 D82 Reversible tungsten-carbide insert for deburring sheet metal up to 8,0 mm thickness. 2 cutting edges. 107 024 1 D82 TC TC E Unigrat „Blade E" Packing unit: in plastic pack E100 HSS Article no. HSS blade with B 10 cutting edge, long shank only.
Unigrat „Steel holder” Packing unit: in plastic pack Article no. Steel holder B 107 011 1 Steel holder C 107 019 1 Steel holder D 107 022 1 Steel holder E 107 025 1 Steel holder F 107 031 1 B C D E F Edge trimmer with HSS blades • Plastic handle with removable back for spare blade storage. • Exchangeable blades. • Ideal for trimming edges, tubes, steel, aluminium, brass and copper sheets, cast iron and plastic sheets. E 350 Packing unit: in plastic pack Article no.
Groove deburrer set “N” with HSS disk blade • • • • 12 Plastic handle. Exchangeable HSS disk blade. Ideal for grooves from 2,4 - 11,0 mm width. Especially suitable for deburring shaft keyways and bores in steel and aluminium. Packing unit: in plastic pack Article no.
12 Unigrat sets A rational deburring system for all deburring work that has to be done by hand. The wide selection of blades provides a wide range of deburring possibilities for bores and edges. The various blades enable you to debur bores from inside, outside or on both sides, as the blade itself adapts to the contours. Packing unit: in plastic packs Article no.
