Datasheet

1.11
1.11
- 200 -
Deburring program
Packing unit: in plastic pack
Unigrat System
Description Article no. Content
pieces
Price /
each €
Universal handle A
This handle ts all holders B-C-D-E-F. With the locking head
withdrawn, the steel holders can be adjusted up to 100 mm in
length and can be locked in any position. The replacement blades
t in the bottom cavity of the handle.
107 010 1
Steel holder B 107 011 1
Blade B 10 The HSS blade most commonly used for
internal and external deburring work on long-chipping materials
such as steel, aluminium, plastics etc.
107 012 10
Blade B 20 This HSS blade is used for short-chipping
materials such as brass and cast iron. Can be used in
both directions.
107 014 10
Blade B 30 This HSS blade is suitable for the simultaneous
deburring of inside and outside bores in material up to 4 mm thick.
107 015 10
Blade B 50 Scriber with carbide-tipped point, regrindable. 107 016 1
Blade B 60 This HSS blade removes burrs from the back
of material up to 20 mm thick.
107 017 10
Blade B 70 This carbide-tipped blade deburs
workpieces made of material up to 3 mm thick.
107 018 1
Steel holder C 107 019 1
Blade C 40 Small HSS triangular scraper 4 x 20 mm for
precision work on surfaces up to 4 mm wide.
107 020 1
Blade C 42 Large HSS triangular scraper 8 x 30 mm for
standard work on surfaces up to 8 mm wide.
107 021 1
Steel holder D 107 022 1
Blade D 80 Reversible tungsten-carbide insert for blunt scraping
and deburring sheet metal up to 3 mm thick. 6 cutting edges.
107 023 1
Blade D 82 Reversible tungsten-carbide insert for
deburring sheet metal up to 8 mm thick. 2 cutting edges.
107 024 1
Steel holder E 107 025 1
Blade E 100 HSS blade with B 10 cutting edge, long shank
only. For internal and external deburring work on long-chipping
materials such as steel, aluminium, plastics etc.
107 026 10
Blade E 200 HSS blade with B 20 cutting edge, long shank
only. For short-chipping materials such as brass and cast iron.
Usable in both directions.
107 027 10
Blade E 300 HSS blade with B 30 cutting edge, long shank
only. For simultaneous deburring of internal and external bores
in materials up to 4 mm thick.
107 028 10
Blade E 350 This HSS blade is suitable for deburring
straight edges, keyways etc.
107 029 10
Blade E 600 This HSS blade is suitable for deburring
from behind in materials up to 20 mm thick.
107 030 5
Steel holder F 107 031 1
Countersinker F 12 HSS countersinker for deburring bores
up to Ø 12 mm
107 032 1
Countersinker F 20 HSS countersinker for deburring bores
up to Ø 20 mm
107 033 1
Countersinker F 30 HSS countersinker for deburring bores
up to Ø 30 mm
107 034 1