User's Manual

V1.2 2020-09-25
www.risinghf.com
RHF0M0E5 User Manual
RisingHF
6
AT+TEST=RFCFG,[FREQUENCY],[SF],[BANDWIDTH],[TX PR],[RX PR],[TX
POWER],[CRC],[IQ],[NET]
Format：
AT+TEST=RFCFG,470,7,125,8,8,14,OFF,OFF,OFF
Return：
+TEST: RFCFG F:470000000, SF7, BW125K, TXPR:8, RXPR:8, POW:14dBm, CRC:OFF,
IQ:OFF, NET:OFF
3.3.1 test noise floor
Parameter 470 is the test frequency (MHz) and parameter 25 is the number of samples.
The return parameters - 98, - 98, - 98 are the average value, the maximum value and the minimum
value, respectively.
Format：
AT+TEST=RSSI,470,25
Return：
+TEST: RSSI, -98, -98, -98
3.3.2 test TXCW
Format：
AT+TEST=TXCW
Return：
+TEST: TXCW
3.3.1 test CLORA
Format：
AT+TEST=TXCLORA
Return：
+TEST: TXCLORA
3.3.2 test send LORA packet
Format：
AT+TEST=TXLRPKT,112233
Return：
+TEST: TXLRPKT "112233"
+TEST: TX DONE
3.3.3 test receive LORA packet
Format：
AT+TEST=RXLRPKT
Return：
+TEST: RXLRPKT
Display message when LORA packet is received