User's Manual

V1.2 2020-09-25
www.risinghf.com
RHF0M0E5 User Manual
RisingHF
5
3.2.5 Configure class
Format：
AT+CLASS=A
Return：
+CLASS: A
3.2.6 Join
Use the at + join command to join the network. Start the network access process when the module is
not connected to the network
Format：
AT+JOIN
Return：
+JOIN: Start
+JOIN: NORMAL
+JOIN: Network joined
+JOIN: NetID 000000 DevAddr 01:09:BD:8C
+JOIN: Done
Use the at + join command to join the network. Return to network status when the module is connected
to the network
Format：
AT+JOIN
Return：
+JOIN: Joined already
Use the AT+JOIN=FORCE command to force joining the network.
Format：
AT+JOIN=FORCE
Return：
JOIN: Start
+JOIN: FORCE
+JOIN: Network joined
+JOIN: NetID 000000 DevAddr 01:09:BD:8C
+JOIN: Done
3.3 TEST mode
Test mode is used to evaluate the performance of the module, which helps the user to find the module
problems
Use AT+MODE=TEST configuration module to enter test mode
Format：
AT+MODE=TEST
Return：
+MODE: TEST
Use AT+TEST=RFCFG to configure parameters in module test mode