User's Manual

V1.2 2020-09-25
www.risinghf.com
RHF0M0E5 User Manual
RisingHF
4
+MSG: Done
3.2 OTAA mode
Use the AT+ID command to query the module ID information and register the ID information to the
server OTAA mode device. Follow these steps to configure the node so that it can communicate with
the server.
3.2.1 ID query
Format：
AT+ID
Return：
+ID: DevAddr, 00:DF:E0:2E
+ID: DevEui, 20:4F:37:50:32:36:50:08
+ID: AppEui, 52:69:73:69:6E:67:48:46
3.2.2 Configure band
Set the band of the node according to the working frequency of the gateway.( EU868、US915、US915、
HYBRID、CN779 、EU433、AU915、AU915OLD、CN470、AS923、KR920、IN865 、RU864、
CN470PREQUEL、STE920)
Format：
AT+DR=CN470
Return：
+DR: CN470
3.2.3 Configure channels
Set the channel of the node according to the type of gateway sub band
Format：
AT+CH=NUM,0-7
Return：
+CH: NUM, 0-7
Query whether the channel of the module matches the gateway through the AT+CH command
Format：
AT+CH
Return：
+CH: 8; 0,470300000,DR0,DR5; 1,470500000,DR0,DR5; 2,470700000,DR0,DR5;
3,470900000,DR0,DR5; 4,471100000,DR0,DR5; 5,471300000,DR0,DR5; 6,471500000,DR0,DR5;
7,471700000,DR0,DR5;
3.2.4 Configure mode
Format：
AT+MODE=OTAA
Return：
+MODE: LWOTAA