Users Manual

Main Router
Ensure the router can access the Internet
After pressing the button, the system indicator starts blinking.
As the detection ends after 2 minutes, it will stop blinking.
settings. If they are configured before, restore the factory settings
first (see the FAQ for how to restore the factory settings). Do not
connect the network cable to the routers.
Power on the routers within 2 meters of the main router, and their
indicators will start to blink quickly. Wait for a period of time, the
system indicators will turn to steady on, which means the routers are
on. Press the Pairing button on the main router, and its system
indicator will start to blink. The main router will search for
neighboring secondary routers for 2 minutes. After the search is over,
the system indicator changes to steady on. When the system
indicators on the secondary routers blink, it means that two routers
are being paired; when the system indicator changes to steady on,
the pairing completes.
3. Move the paired Reyee Mesh routers to the positions where
the signal needs to be expanded, and power them on. No more
configuration is required.
After the router is powered on, the system indicator blinks, which
means it is connecting to the main router. When the system indicator
turns to steady on, the connection is successful, and a distributed
WiFi network can be constructed.
Press for pairing
Broadband
Secondary Router
Do not connect with network cable
During pairing, the system indicator
blinks.
If pairing succeeds, it will stop blinking.