User Manual

Copyright © 2015 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
PERFORMANCE HOOD VENTS
Page 5/8
3. Place hood template on at surface. With a
hobby knife or razor blade, cut out the shaded
circles for the ‘Footman Holes’.
4. Lift hood and place a blanket or
other protective barrier over engine
bay, fenders, and windshield. Gently lower hood.
INSTALLATION INSTRUCTIONS FOR USE WITH OE HOOD.
1. Raise Hood and remove hood insulation blanket
by removing christmas tree fasteners using tree
fastener removal tool. (JK Model Only)
2. Remove Footman using a 9mm socket. For TJ/LJ
models, also remove windsheild bumpers.
NOTICE
There are 2 template patterns printed on the
template sheet. Make sure to reference only
the pattern meant for your vehicle.
Items marked JK are for 2007-2015 Wrangler.
Items marked TJ/LJ are for 1997-2006 Wrangler.
CAUTION
!