User Manual

Copyright © 2015 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
PERFORMANCE HOOD VENTS
Page 4/8
4. With a 3/32” allen wrench, re-install J-Clip screws
into the 2 J-Clips and fully tighten.
Repeat steps 3 and 4 for Performance Hood Vent
Insert on other side.
3. Position Performance Hood Vent Insert on top
side of hood. Hold vent in place with one hand, and
install 2 J-clips, one onto each Hood Vent Mounting
Bracket on the user-side of hood. Make sure
each J-Clip captures hood ange and Hood Vent
Mounting Bracket.