User Manual

Copyright © 2015 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
PERFORMANCE HOOD VENTS
Page 3/8
1. Using a phillips head screwdriver and suppplied
phillips head screws, install inner and outer Hood
Vent Mounting Brackets onto each Performance
Hood Vent.
2. Open Hood. Uninstall left and right metal hood
vents by removing the 8 J-Clip Screws and J-clips
(4 per side) using a 3/32 inch allen wrench.
NOTICE
Save J-Clips and screws for later use.
INSTALLATION INSTRUCTIONS FOR USE WITH RUGGED
RIDGE PERFORMANCE VENTED HOOD
(part # 17759.01)
NOTICE
If installing on OE hood, skip to OE Hood
Installation Instructions section beginning on page 5.