User Manual

Page 20 of 23 REV.1 06/25/2012
Snorkel Installation Instructions: 2007-2011 Wrangler 2DR & 4DR Unlimited
P/N: 17756.06 - Low Mount XHD Modular Snorkel System
113 - Reattach side marker
bulb to inside of fender
are. To secure bulb turn
socket clockwise.
112 - With all 13 bolts
secured double
check alignment
of fender. Tighten
all bolts.
114 - If door was removed
reinstall and secure with
factory door torx nuts.
Side steps or rock rails
should be reinstalled
at this time. The help of
a second person is
recommended.
115 - Tuck drain tube up
behind inner fender
liner and between
lower fender and
inner pinch weld.
as shown.
116 - Add “U” gasket to low
mount intake if not
already installed to
snorkel main body.
Starting from lower
intake edge work
around the intake
making sure gasket is
tted tight to intake.
Trim gasket if needed.
117 - Rest lower intake onto
snorkel body as shown.
lower (long) M6 caps head
bolts will be started rst.