User Manual

Page 13 of 23 REV.1 06/25/2012
Snorkel Installation Instructions: 2007-2011 Wrangler 2DR & 4DR Unlimited
P/N: 17756.06 - Low Mount XHD Modular Snorkel System
70 - Tighten lower 3” clamp.
Clean away extra sealant.
72 - Intsall (2) M8 nuts and (2)
M8 at washers to the
underside of inner fender
mounting plate. Add
sealant if needed to insure
a water tight seal.
73 - Tighten M8 hardware
to secure new air box
to vehicle. Inspect
sealant around bolt
heads and washers
to insure there are
no gaps. Smooth out
sealant and clean o
extra material.
75 - Inspect 90 degree elbow
around lower radiator hose.
Elbow can have minor
contact with radiator hose
but should not be deformed
or crushed. This will insure
proper air ow to lower air
box.
74 - Add sealant to inside
of air box intake. Smooth
sealant around intake
lip and silicone elbow.
70 - Insert (2) M8 x 35 bolts
with (2) M8 at washers
through lower air box
mounting holes and
rubber grommets.
Apply a small amount
of sealant to washers.