Owners manual

Jeep® Center console Vent Switch Pod ( 97-06 TJ-LJ)

Page 1

17235.50Rev (1) 12/14/2010

Item List:

(1) Center Console Vent Switch Pod

(Switches sold separately)

Important! Please read instructions completely before installing Switch Pod.

Step 1. Remove factory AC-Heater vent

from vehicle. A small screw

driver can be used to pop vent

from console.(Pic.1).

P/N: 17235.50 TJ - LJ Vent Switch Pod

Step 3. Wiring can be routed between

vent pod and console.

Note: Console face does not

need to be removed. Image

supplied for reference only

(Pic.4).

Step 2. To install switches use a box

knife to cut along switch locator

channels. With switch channels

removed push switch into vent

pod. Switch will snap and lock

into position.

(Pic. 2 - Pic.3)

Step 5. Install new vent switch pod

panel into center console

(Pic 5).

Note: Switch pod is designed to stay

in a fixed forward position. Air

flow will be routed around

switches.

pic. 1

pic. 2

pic. 3 pic. 4

pic. 5

PAGE 1
P/N: 17235.50 TJ - LJ Vent Switch Pod Jeep® Center console Vent Switch Pod ( 97-06 TJ-LJ) Item List: (1) Center Console Vent Switch Pod (Switches sold separately) Important! Please read instructions completely before installing Switch Pod. Step 1. Remove factory AC-Heater vent from vehicle. A small screw driver can be used to pop vent from console.(Pic.1). Step 2. To install switches use a box knife to cut along switch locator channels. With switch channels removed push switch into vent pod.