User Manual

Copyright © 2013 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
Spare Tire Spacer
3. Use diagram below to determine proper bolt pat-
tern for your vehicle. Install M12 x 35 Hex Bolts and
Lock Washers into your bolt pattern.
4. Install spare tire onto bolts using provided Lug
Nuts. Tighten Lug Nuts to secure spare tire.
Bolt Pattern Holes to use
5” x 4.5” A
5” x 5” B
5” x 5.5” C
2. Attach Wheel Mount to Body Mount using M12
x 30 Hex Bolts, Flat Washers, and M12 Lock Nuts.
Mount is slotted to allow side-to-side adjustment. Set
side-to-side position and tighten Lock Nuts.
Page 2/2
11585.02
WARNING
!
Make sure all bolts and nuts are fastened tightly.
A
B
A
B
C
C
B
A
C