User Manual

Copyright © 2013 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
ALUMINUM XHD & ALL TERRAIN BUMPER SERIES
Page 3/8
9. Secure L-bracket to winch plate using M6
hardware.
4. Rotate vacuum pump.
5. Attach vacuum pump to rear factory stud
using hardware removed in step 1. Re-attach
air-line and wire harness.
6. Using M6 Long hardware attach L-bracket to
vacuum pump. L-bracket should attach at the
bottom of vacuum pump bushing.
7. Position winch plate on top of the frame horn.
8. Insert nut plate and attach using M10 hardware.