User Manual

Copyright © 2013 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [e-mail]
Page 1/1
11348.02
Bug Deflector
OMIX-ADA
®
TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [e-mail]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Contents:
• Bug Deector (1)
• Screw Plugs (2)
• Phillips Head Screws (2)
• Washers (2)
2. Remove red protective backing from double sided
tape. Install bug deector. Secure with two washers and
two screws into previously plugged holes. Press rmly on
taped areas and hold for 60 seconds.
NOTE: Do not use power tools to install this product. Do
not overtighten.
1. Clean and open hood. Test t bug deector centrally
on hood. Note (2) holes in hood cooresponding with two
slots in bug deector. Remove bug deector. Insert plastic
screw plugs into holes previously noted.